ACU-RITE 200S READOUTS Uživatelský manuál stáhnout pdf (Strana 47)

200S 33

I - 3 Milling Specific Operations

Preparation:

8 Select the tool with the appropriate tool data.

8 Pre-position the tool to an appropriate location (such as X = Y = -1”).

8 Move the tool to milling depth.

8 Press the PRESET soft key.

8 Press the Y axis key

-ALTERNATIVE METHOD -

8 Press the SET/ZERO soft key so that you are in Set mode.

8 Press the Y axis key.

8 Enter nominal position value for corner point 1: Y = 1”, and select

tool radius compensation R + with R+/- soft key. Press until R+ is

shown next to axis form.

8 Press ENTER.

8 Traverse the Y axis until the display value is zero. The square in the

near zero warning is now centered between the two

triangular marks.

8 Press the PRESET soft key.

8 Press the X axis key.

-ALTERNATIVE METHOD -

8 Press the SET/ZERO soft key so that you are in Set mode.

8 Press the X axis key.

8 Enter nominal position value for corner point 2: X = 1.5” select tool

radius compensation R - with R+/- soft key. Press twice until R- is

shown next to axis form.

8 Press ENTER.

8 Traverse the X axis until the display value is zero. The square in the

near zero warning is now centered between the two

triangular marks.

8 Presets can be entered in the same manner for corners 3, and 4.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 97 98

Žádné komentáře

ACU-RITE 200S READOUTS Uživatelský manuál Strana 47